Sensoray 518 Instrukcja Użytkownika Pobierz pdf (Strona 44)

4 to 20 mA Current Loops

The coprocessor supports 4-20 mA current loop inputs on any channel, however, a 250-ohm

0.01% resistor must be installed as shown in the following diagram. These resistors are available

as an option for the 518: order Sensoray part number 7408R.

Make sure that any current loop sensors are at the grounded end of the loop so that the common-

mode voltage does not exceed 5 volts.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 56 57

Brak uwag

Sensoray 518 Instrukcja Użytkownika Strona 44